You opened the dryer, hoping for cozy, warm towels; suddenly, you are greeted by a chilly, soggy disaster. Panic ensues. But before you reach for the phone to call a repair service, think twice. It could be something as simple as the dryer spinning but no heat. A service visit could set you back at least $150, while the likely broken part can be replaced for under $25—and it only takes about 15 minutes to do it yourself.

Disclaimer: This dryer spinning but no heat guide involves high-voltage appliances. Always unplug the dryer before removing any panels. If you are uncomfortable working with electricity, please hire a professional. FrugalFix.io is not liable for damages or injury.
This guide will show you exactly how to diagnose and fix a dryer spinning but no heat.
Common dryer spinning but no heat components
Appliance Repair Articles
-
November 11, 2026
5 Fast Steps: Why Does My Whirlpool Dryer Say AF Code
If you are wondering exactly why does my whirlpool dryer say af code, the answer is straightforward: your machine’s main control board has detected aRead more -
November 11, 2026
Fast Master Guide: How to Reset LG Fridge Error 02
Plugging in an LG refrigerator.Read more -
November 8, 2026
Whirlpool Refrigerator Not Cooling But Freezer Works? (Diagnose & Fix It)
The Whirlpool refrigerator is not cooling, but the freezer works.Read more
If the drum is spinning, the motor is working. That is good news. It means the issue is likely one of two cheap components:
- The Heating Element: The coils that actually create the heat (likely burned out).
- The Thermal Fuse: A safety device that cuts power if the dryer gets too hot (likely blown).
Hearing your dryer drum spin should equate to dollar bills back into your wallet. This small movement shows that your dryer still has signs of life. When issues arise, the problem isn’t the motor itself. The two likely culprits here are inexpensive parts, which are the heating element and the thermal fuse.
The heating element is a main component that converts electricity into heat. If this burns out, your clothes will become damp. The thermal fuse acts as a safety mechanism and shuts off power if the system becomes too hot, preventing fire hazards. Both of these parts are affordable, allowing you to fix the dryer yourself instead of calling a technician to come out. This can save you a few hundred dollars while also teaching you a new skill. Let’s diagnose the dryer spinning but no heat issue now!
Tools You Will Need
You don’t need a contractor’s van when trying to troubleshoot a dryer spinning but no heat. You likely have most of these, but there is one tool you cannot skip:
- Screwdriver Set (Phillips and Flathead).
- [Link: Digital Multimeter]: Essential. You cannot “guess” if a fuse is blown; you have to test it. This $12 tool saves you from buying the wrong parts. You can buy more expensive versions; that is up to your budget.
- Work Gloves: The inside of a dryer has sharp metal edges.
Step-by-Step: How to Fix It
(Note: These dryer spinning but no heat steps apply to most Whirlpool, Kenmore, and Maytag dryers with the lint trap on top).
1. Safety First
Unplug the dryer. Pull the machine away from the wall. We don’t need to add a hospital bill to the mix now, do we? We should always practice safety first.

2. Remove the Back Panel
Use your screwdriver to remove the hex-head or Phillips screws securing the rear panel. Set the screws in a cup so you don’t lose them.
3. Locate the Heating Element
Look for a silver metal box (usually on the bottom right). You will see wires connecting to it.
- Pro Tip: Take a picture with your phone before you disconnect any wires so you know how to put them back.
4. Test for Continuity (The “Magic” Step)
This is where you save money. Set your [Link: Multimeter] to the lowest resistance setting (Ohms/Ω).
- Touch the probes to the two metal terminals on the heating element.
- If it beeps (or shows numbers), the element is good.
- If it stays at 1 (or OL): The element is dead. [Link: Buy Replacement Element Here].

5. Check the Thermal Fuse
If the element is good, find the thermal fuse (a thin white strip often on the blower housing). Test it the same way. If it has no continuity, it’s blown. [Link: Buy Thermal Fuse Here].
Maintenance: Stop It From Happening Again
Once you’ve swapped the part and screwed the panel back on, do one last thing: clean your vents. A blown thermal fuse is almost always caused by a clogged vent trapping heat.
- Check the flexible hose behind the dryer.
- Check the vent exit outside your house.
Summary
You just turned a $200-plus dryer spinning but no heat crisis into a $25 victory. Not only is your laundry dry, but you now own the tools and the knowledge to fix it next time. Here are a few tips to keep in mind.
- Multimeter—When it comes to multimeters, the price point can be as low as $10 all the way up to hundreds of dollars. With the technological progress of 2025, multimeters have come a long way. An auto multimeter may be the best choice for you if you are not comfortable with one. Keep in mind, there are also YouTube videos that can be found.
- If you can find a dryer model number or part number, this can help you find the right part much easier. You might be able to find parts that are cheaper.